A DPDT limit switch (double pole double throw) contains two independent sets of changeover contacts driven by a single actuator. Each pole switches between a normally open (NO) and a normally closed (NC) contact, so one mechanical movement controls two separate circuits — for example stopping a drive motor while signalling a controller that the end position has been reached.
Leve personalizzate, terminali e lunghezze di filo
Specifications of DPDT Limit Switch
What is a DPDT limit switch?
A DPDT limit switch (double pole double throw) contains two independent sets of changeover contacts driven by a single actuator. Each pole switches between a normally open (NO) and a normally closed (NC) contact, so one mechanical movement controls two separate circuits — for example stopping a drive motor while signalling a controller that the end position has been reached.
Unionwell DPDT limit switches pair a snap-action contact mechanism with a sealed or dustproof housing, giving repeatable operating points, low contact resistance and long mechanical life in industrial, appliance and automotive equipment.
How a DPDT limit switch works
Pressing the lever or plunger moves a common actuator blade. At the operating point the snap-action mechanism transfers both poles at once, so all six terminals change state together. Because the two poles are mechanically linked rather than electrically coupled, each can carry an independent circuit while staying synchronised — even after millions of operations.
Key specifications
The table below lists the electrical and mechanical characteristics of this DPDT limit switch. Ratings, operating force, lever type and sealing class can all be customised for volume projects.
DPDT stands for double pole double throw. The switch has two common terminals, and each one switches between a normally open and a normally closed contact, so a single actuator controls two circuits.
What is the difference between a DPDT switch and a DPST switch?
A DPST switch only opens and closes two circuits. A DPDT switch also has a second contact position per pole, so it can change a circuit over rather than simply break it.
Can Unionwell supply a custom DPDT limit switch?
Yes. Levers, terminals, cable lengths, operating force and sealing class are all customised for volume orders, and evaluation samples are available.
How do I confirm the right operating force?
Send the drawing or the target actuation force and travel. Our engineers will recommend a configuration and supply samples for testing.
